Underlay4u Blog

How To Fit Your Gripper Rods and Underlay

Posted by Underlay4u on  8th December 2010

0
Category: How To Fit
This post tells you everything you need to know about carpet grippers. There’s 2 sections. You can navigate the page easily. Just click the links below to read more and find the answers to your questions. Section 1. What are gripper rods? Do I need them? Where to buy? Section 2. How to fit carpet grippers If you’ve chosen to go down the DIY route, make sure you read this article in full. It will
Floor Boards All wooden floors boards must be structurally sound, level, smooth, and dry And clean to ensure that your carpet underlay will perform. Worn or uneven floorboards should either be replaced or levelled by sanding, planning or covering with flooring grade plywood. Chipboard Floors Chipboard should comply with BS5669 flooring grades, type, C2, C4 or C5. It is essential that floating chipboard and other Composition floors are dry smooth and have no lumps or
How much underlay do I need? On our web site we have a room calculator that gives a good indication on how much carpet underlay and gripper you will need. However when you are working out rooms that are not square, rectangular or hall stairs and landings you may find that you have to manually work out the quantities involved. The Easy Way Measure up your areas and ring us up – we are happy
If you want to put a carpet over old uneven Flag Stones and do not wish to take them up or concrete/asphalt over them what do you do? Old flagstones by nature are always uneven and over time the Flags sink and move, giving an uneven floor making a fitted carpet unsightly. Manufactures will not guarantee the carpet for wear if the sub floor is not smooth and sound and this is quite understandable as

LEAVE A COMMENT